- #Garmin homeport join some not all tracks manuals
- #Garmin homeport join some not all tracks series
- #Garmin homeport join some not all tracks download
For a quick half day outing on rough trails, four hours will fit into 1000 points at 15 second intervals.
Selected interval then depends on the length of the trip and the capacity of your track log. As an alternative, I like to use time intervals and ration the Active Log over the entire trip duration. The advantage of "Auto" is that it will use more points when speeds are low with numerous changes of direction, and less points when your moving fast and straight. If you want to save tracks and clear the active log at the end of every day, then this setting should work fine. Either distance or time intervals can be selected. By default the unit uses "Auto" with normal intervals. If you began recording prior to the intended starting point its OK, but you will then need to edit either when you save it or on your computer after it is downloaded. This is fine, but you'll want to make sure the tracking feature is turned on and clear what's already in the log at the starting point of your ride. The unit replaces the oldest data with current points. By default Garmin units roll over the active log and record continuously. Go to the "Tracks" page from the main menu on your GPS. This ensures that all receivers will be able to use your logs with a minimum of hassle. I've found the very best way to share tracks from a GPSMAP type unit is to share both the Active Log and to save condensed tracks at a 500 point maximum. New logs are simply appended to old ones until the memory runs out. The Active Log is treated as a sequence of tracks which can not be handled individually. To save a named track to these receivers, the tracks must be renamed to: "ACTIVE LOG, ACTIVE LOG 001, ACTIVE LOG 002, etc". They can load and use saved tracks from a computer, but only to the Active Log. Streetpilot and Quest receivers do not use Saved Tracks. The advantage is that Saved Tracks of no more than 500 points are more or less universal and can be read by almost any receiver. This and the size limit is a big drawback of sharing saved tracks. Be aware that when a track is saved, the time, speed and altitude stamps are lost. This size is either 500 or 700 points, by model. When the entire Active Log is saved it will be condensed to fit the maximum size of a Saved Track. Within the GPS, the Active Log may be used to save a track. The breaks are not visible from within the unit itself.
#Garmin homeport join some not all tracks download
So when you download the Active log to a computer it begins a new track at each break. When the GPS is turned off or looses reception, the track sequence is closed and a new one started. Frequency of track points can be set to a given time or distance interval. The active memory varies between 3000 and 10,000 points and includes time and altitude stamps in the recording.
#Garmin homeport join some not all tracks series
The GPSMAP series of receivers all include a provision to save tracks from the active log and also to load saved tracks from a computer. There are two types of Garmin tracks: Active Tracks and Saved Tracks. In order for a track to be transferable from one Garmin receiver to another it must be of a compatible size and configuration.
#Garmin homeport join some not all tracks manuals
The Garmin manuals are fairly simple, but woefully incomplete. Read a couple of pages in the book and go at it.
0 kommentar(er)
